MU650VS
Magnizon MU650VS Series is a smart line interactive UPS with the most advanced DSP control technology with built in boost & buck AVR technology which can protect the sensitive device from utility fail, over /under voltage, surges, transients, spikes and other electrical abnormalities. With automatic boost voltage regulation and wide input voltage range, VS series UPS is a good choice to be applied to all kinds of complex power environment. With elegant color LCD display shows plenty of information, alarms, error codes, battery charge status, load status etc.
| Output Volt Amp Capacity (VA) | 650 |
| Output Watt Capacity (Watts) | 390 |
| Nominal Output Voltage(s) Supported | 220V; 230V; 240V |
| Nominal Voltage Details | 230V nominal output in battery mode |
| Frequency Compatibility | 50 / 60 Hz |
| Frequency Compatibility Details | Automatic frequency selection |
| Output Voltage Regulation (Line Mode) | 230V (±9.5%) |
| Output Voltage Regulation (Battery Mode) | 230V (±5%) |
| Output Receptacles | 1no C13 and 2nos Universal Outlets |
| Output AC Waveform (AC Mode) | Sine wave |
| Output AC Waveform (Battery Mode) | PWM sine wave |
| Rated input current (Maximum Load) | 2.8A |
| Nominal Input Voltage(s) Supported | 230V AC |
| UPS Input Connection Type | Cable with Plug |
| Input Phase | Single-Phase |
| Full Load Runtime (min.) | 3 min. (390w) |
| Half Load Runtime (min.) | 6 min. (195w) |
| DC System Voltage (VDC) | 12 |
| Battery Recharge Rate (Included Batteries) | 8 hours from 10% to 90% |
| Battery Replacement Description | See manual for battery replacement information |
| Transfer Time | 4~6 milliseconds |
| Low Voltage Transfer to Battery Power (Setpoint) | 130V |
| High Voltage Transfer to Battery Power (Setpoint) | 290V |
| Voltage Regulation Description | Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 130 and as high as 290 |
| Overvoltage Correction | Input voltages between 240 and 290 are reduced by 10% |
| Undervoltage Correction | Input voltages between 130 and 210 are boosted by 15% |
| Switches | 1 Switch controls off/on power status |
| Audible Alarm | Audible alarm with distinct tone patterns indicates low-battery, overload, replace-battery and fault-mode |
| LCD Display | Large color LCD with AC input, AC output, Load, Battery status, fault condition, error code display |
| LED Indicators | Front panel LEDs indicate off/on power status, line power availability, battery mode operation, overload, replace-battery and fault-mode |
| UPS AC Suppression Joule Rating | 325 |
| UPS AC Suppression Response Time | Instantaneous |
| EMI / RFI AC Noise Suppression | Yes |
| Installation Form Factors Supported with Included Accessories | Tower |
| Primary Form Factor | Tower |
| UPS Power Module Weight (kg) | 4.8kgs |
| Shipping Weight (kg) | 5.1Kgs |
| UPS Housing Material | Stainless steel |
| Dimension (DxWxH mm) | 320x 90 x 150 |
| Operating Temperature Range | 0 to 40°C |
| Storage Temperature Range | -15 to 45°C |
| Relative Humidity | Up to 90%, non-condensing |
| AC Mode BTU / Hr. (Full Load) | 26 |
| AC Mode Efficiency Rating (100% Load) | 95% |
| Noise level | less than 35dB |
| Operating Elevation (m) | 0-2000m |
| Communications Interface | USB |
| Communications Interface | USB/RS232 Serial |
| Network Management Cards | N/A |
| Software compatibility | Windows family all versions, Linux, Sun Network OS, IBM Aix, Compaq Tru64 SGI IRIX, FreeBSD, HP-UX and MAC |
| UPS monitoring Software | Supplied along with UPS. Optional SNMP card with web based available on request |
| Communications Cable | RS232 serial |
| UPS Certifications | CE, EN/IEC 62040-1:2008, EN/IEC 62040-2:2006, EN/IEC 61000-3-3:2013, EN/IEC 61000-3-2:2014 |
| UPS Quality standards | ISO9001:2015, ISO14001:2015, RoHs |
| Product Warranty Period (Worldwide) | 1-year limited warranty |